• Player ID
  
  
  ID number of the Player that should be set. The "Curr_Player" variable ("r9") may be substituted for the ID if this command is called in a Player Function or during a "Boundary Event", otherwise it may not have the desired effect
  
  
  
• Character ID
  
  
  ID number of the Character Script that the player should use
  
  
  

• Starting Constant ID
  
  
  The ID number of the first Player Constant to restore. The lower-case "c" tag may be used to signify a user-defined Player Constant as opposed to one of the required Constants
  
  
  
• Ending Constant ID
  
  
  The ID number of the last Player Constant to restore. The lower-case "c" tag may be used to signify a user-defined Player Constant as opposed to one of the required Constants
  
  
  

• Player ID
  
  
  ID number of the Player whose position should be set
  
  
  
• X Pos
  
• Y Pos
  
  
  The new X and Y positions at which to place the Player
  
  
  
• Alignment
  
  
  How to align the Player against a Path when the movement is done. The values are as follows:
  
  0 - No alignment, Player stays at the exact X and Y positions specified
  1 - Move the Player down to the nearest floor Path, or up if an above Path is colliding with his "MainBounds" Box
  2 - Move the Player right to the nearest right wall Path, or left if a leftward Path is colliding with his "MainBounds" Box
  3 - Move the Player Up to the nearest ceiling Path, or down if a below Path is colliding with his "MainBounds" Box
  4 - Move the Player left to the nearest left wall Path, or right if a rightward Path is colliding with his "MainBounds" Box
  
  
  
• Adjust Viewport
  
  
  This value specifies whether the Viewport should be updated to follow the Player to his new position, or if it's left where it is. (If this flag isn't set, the Viewport will scroll until it reaches the Player's new position.)
  
  0 - Don't set the Viewport position (It will scroll)
  1 - Set the Viewport position to the appropriate location relative to the Player
  

• Reference:
  
  
  ID number of the "Reference" that the Player should be "Fetched" to. Using any of the following values will allow Fetching to more than one Reference:
  
  3 - Fetch this Player to Reference 0 and 1
  4 - Fetch this Player to Reference 1 and 2
  5 - Fetch this Player to Reference 0 and 2
  6 - Fetch this Player to Reference 0, 1, and 2
  
  
  
• Player ID
  
  
  ID number of the Player to "Fetch" to this "Reference". The "R" and "r" tags may be used to obtain a Player ID (Including "r9" for "Curr_Player" during any Player or Collision Function) from a Register
  
  
  
  

• Reference:
  
  
  ID number of the "Reference" that the Player should be "Fetched" to. Using any of the following values will allow Fetching to more than one Reference:
  
  3 - Fetch this Player to Reference 0 and 1
  4 - Fetch this Player to Reference 1 and 2
  5 - Fetch this Player to Reference 0 and 2
  6 - Fetch this Player to Reference 0, 1, and 2
  
  
  
• Var ID
  
  
  In the case of "Registers", "Var ID" is the ID of the "Register" that contains the pointer. The "U" tag may be used to specify a user-defined Register. Otherwise, the ID will refer to a Game Register
  
  In the case of Player Variables, "Var ID" is the ID of the Player Variable that contains the pointer. The capital "A" tag may be used to specify an "Active" variable, the lower-case "a" to specify a user- defined "Active" variable, and the lower-case "c" to specify a user-defined Constant. Otherwise, the ID will refer to one of the Player's required Constants
  
  In the case of Object Variables, "Var ID" is the ID of the Object Variable that contains the pointer. The "E" tag may be used to specify an "Extra" variable. Otherwise, the ID will refer to one of the Object's standard variables
  
  
  

• Src Reference:
  
  
  ID number of the "Reference" to copy
  
  
  
• Dest Reference:
  
  
  ID number of the "Reference" that the Player should be copied to. Using any of the following values will allow Fetching to more than one Reference:
  
  3 - Fetch this Player to Reference 0 and 1
  4 - Fetch this Player to Reference 1 and 2
  5 - Fetch this Player to Reference 0 and 2
  6 - Fetch this Player to Reference 0, 1, and 2
  
  
  

• References
  
  
  Specifies which two References should be swapped:
  
  0 - Swap References 0 and 1
  1 - Swap References 1 and 2
  2 - Swap References 0 and 2
  

• Player ID
  
  
  ID number of the Player to test for collisions. The "R" and "r" tags may be used to obtain a Player ID from a Register
  

• Var ID
  
  
  ID of the Player Variable that contains the Function ID. The capital "A" tag may be used to specify an "Active" variable, the lower-case "a" to specify a user- defined "Active" variable, and the lower-case "c" to specify a user-defined Constant. Otherwise, the ID will refer to one of the Player's required Constants
  
  
  

• Var ID
  
  
  ID of the desired "Character-Specific Function". The "R" and "r" tags may be used to obtain the ID from a Register
  
  
  

• Var ID
  
  
  In the case of a Constant Value, the ID of the Character Common Function should be entered as the "Var ID" parameter rather than any actual variable ID. However, the "R" or "r" tags may be used to obtain the ID from a Register
  
  In the case of Player Variables, Var ID is the ID of the Player Variable that contains the Function ID. The capital "A" tag may be used to specify an "Active" variable, the lower-case "a" to specify a user- defined "Active" variable, and the lower-case "c" to specify a user-defined Constant. Otherwise, the ID will refer to one of the Player's required Constants
  
  
  

• Var ID
  
  
  ID of the desired "Character-Specific Function". The "R" and "r" tags may be used to obtain the ID from a Register
  

• Var ID
  
  
  In the case of "Registers", "Var ID" is the ID of the "Register" into which to place the pointer. The "U" tag may be used to specify a user-defined Register. Otherwise, the ID will refer to a Game Register
  
  In the case of Player Variables, "Var ID" is the ID of the Player Variable into which to place the pointer. The capital "A" tag may be used to specify an "Active" variable, the lower-case "a" to specify a user- defined "Active" variable, and the lower-case "c" to specify a user-defined Constant. Otherwise, the ID will refer to one of the Player's required Constants
  
  In the case of Object Variables, "Var ID" is the ID of the Object Variable into which to place the pointer. The "E" tag may be used to specify an "Extra" variable. Otherwise, the ID will refer to one of the Object's standard variables
  

• Var ID
  
  
  In the case of "Registers", "Var ID" is the ID of the "Register" that contains the velocity to apply. The "U" tag may be used to specify a user-defined Register. Otherwise, the ID will refer to a Game Register
  
  In the case of Player Variables, "Var ID" is the ID of the Player Variable that contains the velocity to apply. The capital "A" tag may be used to specify an "Active" variable, the lower-case "a" to specify a user- defined "Active" variable, and the lower-case "c" to specify a user-defined Constant. Otherwise, the ID will refer to one of the Player's required Constants
  
  In the case of Object Variables, "Var ID" is the ID of the Object Variable that contains the velocity to apply. The "E" tag may be used to specify an "Extra" variable. Otherwise, the ID will refer to one of the Object's standard variables
  
  In the case of a Constant Value, the velocity value itself should be entered as the "Var ID" Parameter, rather than any actual Variable ID
  
  
  

• Var ID
  
  
  In the case of "Registers", "Var ID" is the ID of the "Register" that contains the velocity to apply. The "U" tag may be used to specify a user-defined Register. Otherwise, the ID will refer to a Game Register
  
  In the case of Player Variables, "Var ID" is the ID of the Player Variable that contains the velocity to apply. The capital "A" tag may be used to specify an "Active" variable, the lower-case "a" to specify a user- defined "Active" variable, and the lower-case "c" to specify a user-defined Constant. Otherwise, the ID will refer to one of the Player's required Constants
  
  In the case of Object Variables, "Var ID" is the ID of the Object Variable that contains the velocity to apply. The "E" tag may be used to specify an "Extra" variable. Otherwise, the ID will refer to one of the Object's standard variables
  
  In the case of a Constant Value, the velocity value itself should be entered as the "Var ID" Parameter, rather than any actual Variable ID
  
  
  

• Var ID X
  
• Var ID Y
  
  
  In the case of "Registers", "Var ID" is the ID of the "Register" that contains the velocity to apply. The "U" tag may be used to specify a user-defined Register. Otherwise, the ID will refer to a Game Register
  
  In the case of Player Variables, "Var ID" is the ID of the Player Variable that contains the velocity to apply. The capital "A" tag may be used to specify an "Active" variable, the lower-case "a" to specify a user- defined "Active" variable, and the lower-case "c" to specify a user-defined Constant. Otherwise, the ID will refer to one of the Player's required Constants
  
  In the case of Object Variables, "Var ID" is the ID of the Object Variable that contains the velocity to apply. The "E" tag may be used to specify an "Extra" variable. Otherwise, the ID will refer to one of the Object's standard variables
  
  In the case of a Constant Value, the velocity value itself should be entered as the "Var ID" Parameter, rather than any actual Variable ID
  
  
  

• Direction
  
  
  The Direction in which to shove the Player out of the Object:
  
  0 - Shove Player to the top of the Object
  1 - Shove Player to the bottom of the Object
  2 - Shove Player to the left of the Object
  3 - Shove Player to the right of the Object
  
  
  

• VarID
  
  
  ID number of the Object Variable from the "Current Object" that should be used to determine the Object's direction of movement (usually it's velocity). Negative value for up/left, positive for down/right
  
  
  

• VarID X
  
• VarID Y
  
  
  ID number of the Object Variables from the "Current Object" that should be used to determine the Object's direction of movement (usually it's velocity). Negative value for up/left, positive for down/right
  
  
  

• VarID
  
  
  ID number of the Object Variable from the "Current Object" that should be used to determine the Object's direction of movement (usually it's velocity). Negative value for up/left, positive for down/right
  
  
  

• VarID X
  
• VarID Y
  
  
  ID number of the Object Variables from the "Current Object" that should be used to determine the Object's direction of movement (usually it's velocity). Negative value for up/left, positive for down/right
  
  
  

• VarID
  
  
  ID number of the Object Variable from the "Current Object" that should be used to determine the Object's direction of movement (usually it's velocity). Negative value for up/left, positive for down/right
  
  
  

• VarID X
  
• VarID Y
  
  
  ID number of the Object Variables from the "Current Object" that should be used to determine the Object's direction of movement (usually it's velocity). Negative value for up/left, positive for down/right
  

• Player ID
  
  
  ID number of the Player to set as the "Current Player". The "R" and "r" tags may be used to obtain a Player ID from a Register
  
  
  

• Var ID
  
  
  In the case of "Registers", "Var ID" is the ID of the "Register" that contains the pointer. The "U" tag may be used to specify a user-defined Register. Otherwise, the ID will refer to a Game Register
  
  In the case of Player Variables, "Var ID" is the ID of the Player Variable that contains the pointer. The capital "A" tag may be used to specify an "Active" variable, the lower-case "a" to specify a user- defined "Active" variable, and the lower-case "c" to specify a user-defined Constant. Otherwise, the ID will refer to one of the Player's required Constants
  
  In the case of Object Variables, "Var ID" is the ID of the Object Variable that contains the pointer. The "E" tag may be used to specify an "Extra" variable. Otherwise, the ID will refer to one of the Object's standard variables
  
  
  

• Player ID
  
  
  ID number of the Player to set as the "Current Player", and whose "Collision Area" to set by the given ID. The "R" and "r" tags may be used to obtain a Player ID from a Register
  
  
  
• Collision Area ID
  
  
  ID number of the "Collision Area" to set the Player to. The "R" and "r" tags may be used to obtain an ID from a Register
  
  There are 9 "Collision Areas" that correspond with the different sides of the looping level area in the following way:

  	  -------------------------
  	  |       |       |       |
  	  |   0   |   1   |   2   | Above Loop
  	  |       |       |       |
  	  -------------------------
  	  |       |       |       |
  	  |   3   |   4   |   5   | Center (no loop)
  	  |       |       |       |
  	  -------------------------
  	  |       |       |       |
  	  |   6   |   7   |   8   | Below Loop
  	  |       |       |       |
  	  -------------------------
  
  	   Left    Center   Right
  	   Of      (no      of
  	   Loop    loop)    Loop

  
  
  
  

• Player ID
  
  
  ID number of the Player to set as the "Current Player", and whose "Collision Area" to set by the given ID. The "R" and "r" tags may be used to obtain a Player ID from a Register
  
  
  

#  94 ;Set Player Character (Set Player 1 to use Player Character 0)
:   0 ;(Plyr ID) Player 1
:   0 ;(Char ID) Player Character 0

; ----------

#  94 ;Set Player Character (Set Player 1 to use the Player Character whose ID is stored in User Register 0)
:   1 ;(Plyr ID) Player 2
:  R6 ;(Char ID) Value stored in User Register 6

# 824 ;Restore Player Constants (Restore the default values of User-created "Constant"s 5 through 9 of the Player "Fetched" to "Reference 2")
:  c5 ;(Start) User-created "Constant" of the Player "Fetched" to "Reference 2"
:  c9 ;(End)   User-created "Constant" of the Player "Fetched" to "Reference 9"

; ----------

# 824 ;Set Player Character (Restore the default values of the User-created "Constant"s of the Player "Fetched" to "Reference 2" whose values begin at the value stored in User Register 16, and end at the value stored in User Register 17)
: R16 ;(Start) Value stored in User Register 16
: R17 ;(End)   Value stored in User Register 17

# 826 ;Set Player Position (Set the Current Player's X and Y position to exactly 50,256, without aligning him against the level and without adjusting his viewport to follow [this will cause the screen to scroll to him if he is flagged for automatic viewport updates])
:   0 ;(ChrID) Player 1
:  50 ;(X)     
: 256 ;(Y)     
:   0 ;(Align) None
:   0 ;(VPAdj) No

; ----------

# 826 ;Set Player Position (Set the Current Player's X and Y position to the values of User Registers 7 and 8, respectively, adjusting his Y position to set him onto the floor, and adjusting the viewport to follow)
:  r9 ;(ChrID) Current Player
:  R7 ;(X)     User Register 7
:  R8 ;(Y)     User Register 8
:   1 ;(Align) With Floor
:   1 ;(VPAdj) Yes

# 137 ;FetchPlayer (Fetch Player 1 to Reference 0, Reference 1, and Reference 2)
:   6 ;All References
:   0 ;Player 1

; ----------

# 137 ;FetchPlayer (Fetch the "Current Player" to Reference 0)
:   0 ;Reference 0
:  r9 ;Current Player

; ----------

# 137 ;FetchPlayer (Fetch Player 2 to Reference 0 and Reference 2)
:   5 ;References 0 and 2
:   1 ;Current Player

# 990 ;FetchPlayer Reg (Fetch the Player whose pointer is stored in User Register 4 to Reference 0, Reference 1, and Reference 2)
:   6 ;All References
:  U4 ;User Register 4

; ----------

# 991 ;FetchPlayer Curr Chr (Fetch the Player whose pointer is stored in User-created "Active Variable" 32 of the "Current Player" to Reference 2)
:   2 ;Reference 2
: a32 ;User-created "Active Variable" 32 of the "Current Player"

; ----------

# 994 ;FetchPlayer Fetched Obj (Fetch the Player whose pointer is stored in "Extra Variable" 8 of the Object "Fetched" to Reference 0 to Reference 1 and Reference 2)
:   4 ;References 1 and 2
:  E8 ;"Extra Variable" 8 of the Object "Fetched" to Reference 0

#1246 ;CopyFetch Player (Fetch the Player Fetched to Reference 1 to Reference 2 [Both will reference the Player originally referenced by Reference 1])
:   1 ;(Src)  Reference 1
:   2 ;(Dest) Reference 2

; ----------

#1246 ;CopyFetch Player (Fetch the Player Fetched to Reference 2 to both Reference 0 and Reference 1 [All three will reference the Player originally referenced by Reference 2])
:   2 ;(Src)  Reference 2
:   3 ;(Dest) References 0 and 1

#1248 ;SwapFetch Player (Swap the Players that were Fetched to References 0 and 2 [Ex: If Reference 0 previously referenced Player 1, and Reference 2 previously referenced Player 2, then Reference 0 will now reference Player 2, and Reference 2 will now reference Player 1])
:   2 ;References 0 and 2

# 842 ;Current Player Test Collisions (Cause the "Current Player" to test for Collisions with all Objects within "Activity Range")

# 843 ;Other Player Test Collisions (Cause Player 2 to test for Collisions with all Objects within "Activity Range")
:   1 ;Player 2

; ----------

# 843 ;Other Player Test Collisions (Cause the Player whose ID is stored in User Register 5 to test for Collisions with all Objects within "Activity Range")
:  R5 ;Value stored in User Register 5

# 951 ;Call Function CharVar (Cause the "Current Player" to queue the Character-Common Function whose ID is stored in User-created "Constant" 13 of the "Current Player")
: c13 ;User-created "Constant" 13 of the "Current Player"

; ----------

# 952 ;Run Function CharVar (Cause the "Current Player" to queue and immediately process the Character-Common Function whose ID is stored in User-created "Active Variable" 27 of the "Current Player")
: a27 ;User-created "Active Variable" 27 of the "Current Player"

; ----------

# 953 ;Stop Function CharVar (Cause the "Current Player" to remove from its queue the Character-Common Function whose ID is stored in User-created "Active Variable" 5 of the "Current Player")
:  a5 ;User-created "Active Variable" 5 of the "Current Player"

# 954 ;Call Function CharListing (Cause the "Current Player" to queue Character-Specific Function 8 of the Character Def that corresponds with its Player Character Type)
:   8 ;Character-Specific Function 8

; ----------

# 955 ;Run Function CharListing (Cause the "Current Player" to queue and immediately process the Character-Specific Function whose value is stored in User Register 4, of the Character Def that corresponds with its Player Character Type)
:  R4 ;Value stored in User Register 4

; ----------

# 956 ;Stop Function CharListing (Cause the "Current Player" to remove from its queue Character-Specific Function 16 of the Character Def that corresponds with its Player Character Type)
:  16 ;Character-Specific Function 16

#1134 ;Call Function CurrPlayer Const (Cause the "Current Player" to queue Character-Common Function 10)
:  10 ;Character-Common Function 10

; ----------

#1137 ;Run Function CurrPlayer Const (Cause the "Current Player" to queue and immediately process the Character-Common Function whose value is stored in User Register 2)
:  R2 ;Value stored in User Register 2"

; ----------

#1150 ;Stop Function FetchedPlayer Chr (Cause the Player "Fetched" to "Reference 2" to remove from its queue the Character-Common Function whose value is stored in User-created "Active Variable" 9 of the Player "Fetched" to "Reference 2")
:  a9 ;User-created "Active Variable" 9 of the Player "Fetched" to "Reference 2"

#1136 ;Call Function CurrPlayer PList (Cause the "Current Player" to queue Character-Specific Function 31 of the Character Def that corresponds with its Player Character Type)
:  31 ;Character-Specific Function 31

; ----------

#1148 ;Run Function FetchedPlayer PList (Cause the Player "Fetched" to "Reference 2" to queue and immediately process the Character-Specific Function whose value is stored in User Register 19,  of the Character Def that corresponds with its Player Character Type)
: R19 ;Value stored in User Register 19

; ----------

#1149 ;Stop Function FetchedPlayer PList (Cause the Player "Fetched" to "Reference 2" to remove from its queue the Character-Specific Function whose value is stored in User Register 1,  of the Character Def that corresponds with its Player Character Type)
:  R1 ;Value stored in User Register 1

# 978 ;Reg = Ptr to CurrPlayer (Store a pointer to the "Current Player" in User Register 7)
:  U7 ;User Register 7

; ----------

# 986 ;Chr2 = Ptr to FetchedPlayer (Store a pointer to the Player "Fetched" to "Reference 0" in User-created "Active Variable" 11 of the Player "Fetched" to "Reference 2")
: a11 ;User-created "Active Variable" 11 of the Player "Fetched" to "Reference 2"

; ----------

# 988 ;Obj2 = Ptr to FetchedPlayer (Store a pointer to the Player "Fetched" to "Reference 0" in "Extra Variable" 0 of the Object "Fetched" to "Reference 2")
:  E0 ;"Extra Variable" 0 of the Object "Fetched" to "Reference 2"

#1120 ;ShovePlayer Path Reg ("Shove" the Player "Fetched" to "Reference 2" along the path with the velocity given by User Register 8)
:  U8 ;User Register 8

; ----------

#1121 ;ShovePlayer Path Chr0 ("Shove" the Player "Fetched" to "Reference 2" along the path with the velocity given by User-created "Active Variable" 15 of the Player "Fetched" to "Reference 0")
: a15 ;User-created "Active Variable" 15 of the Player "Fetched" to "Reference 0"

; ----------

#1122 ;ShovePlayer Path Obj0 ("Shove" the Player "Fetched" to "Reference 2" along the path with the velocity given by "Extra Variable" 1 of the Object "Fetched" to "Reference 0")
:  E1 ;"Extra Variable" 1 of the Object "Fetched" to "Reference 0"

; ----------

#1122 ;ShovePlayer Path Const ("Shove" the Player "Fetched" to "Reference 2" along the path with a velocity of 512)
: 512 ;Velocity 512 (512/256 = 2 pixels per frame)

#1124 ;ShovePlayer X Reg ("Shove" the Player "Fetched" to "Reference 2" through freespace with the X velocity given by User Register 21)
: U21 ;User Register 21

; ----------

#1129 ;ShovePlayer Y Chr0 ("Shove" the Player "Fetched" to "Reference 2" through freespace with the Y velocity given by User-created "Active Variable" 6 of the Player "Fetched" to "Reference 0")
:  a6 ;User-created "Active Variable" 6 of the Player "Fetched" to "Reference 0"

; ----------

#1126 ;ShovePlayer X Obj0 ("Shove" the Player "Fetched" to "Reference 2" through freespace with the X velocity given by "Extra Variable" 12 of the Object "Fetched" to "Reference 0")
: E12 ;"Extra Variable" 12 of the Object "Fetched" to "Reference 0"

; ----------

#1131 ;ShovePlayer Y Const ("Shove" the Player "Fetched" to "Reference 2" through freespace with a Y velocity of 1024)
:1024 ;Velocity 1024 (1024/256 = 4 pixels per frame)

#1195 ;ShovePlayer Diag Reg ("Shove" the Player "Fetched" to "Reference 2" through freespace with the X and Y velocities given by User Registers 7 and 8)
:  U7 ;(Reg X) User Register 7
:  U8 ;(Reg Y) User Register 7

; ----------

#1196 ;ShovePlayer Diag Chr0 ("Shove" the Player "Fetched" to "Reference 2" through freespace with the X and Y velocities given by User-created "Active Variable"s 17 and 18 of the Player "Fetched" to "Reference 0")
: a17 ;(Chr0 X) User-created "Active Variable" 17 of the Player "Fetched" to "Reference 0"
: a18 ;(Chr0 Y) User-created "Active Variable" 18 of the Player "Fetched" to "Reference 0"

; ----------

#1197 ;ShovePlayer Diag Obj0 ("Shove" the Player "Fetched" to "Reference 2" through freespace with the X and Y velocities given by "Extra Variable"s 0 and 1 of the Object "Fetched" to "Reference 0")
:  E0 ;(Obj0 X) "Extra Variable" 0 of the Object "Fetched" to "Reference 0"
:  E1 ;(Obj0 Y) "Extra Variable" 1 of the Object "Fetched" to "Reference 0"

; ----------

#1198 ;ShovePlayer Diag Const ("Shove" the Player "Fetched" to "Reference 2" through freespace with X and Y velocities of 4096 and 1024)
:4096 ;(Const X) Velocity 4096 (4096/256 = 16 pixels per frame)
:1024 ;(Const Y) Velocity 1024 (1024/256 =  4 pixels per frame)

#1182 ;ShovePlayer ObjectBounds ("Shove" the Player "Fetched" to "Reference 2" through freespace to the top of the "MainBounds" Box of the "Current Object")
:   0 ;Player to Top of Object

; ----------

#1182 ;ShovePlayer ObjectBounds ("Shove" the Player "Fetched" to "Reference 2" through freespace to the left of the "MainBounds" Box of the "Current Object")
:   2 ;Player to Left of Object

#1186 ;ShovePlayer Within TiledObject X ("Shove" the Player "Fetched" to "Reference 2" through freespace on the X axis to the outside of the Object's Tile Solidity in the direction specified by "Extra Variable" 4 of the "Current Object")
:  E4 ;"Extra Variable" 4 of the "Current Object"

; ----------

#1187 ;ShovePlayer Within TiledObject Y ("Shove" the Player "Fetched" to "Reference 2" through freespace on the Y axis to the outside of the Object's Tile Solidity in the direction specified by "Extra Variable" 5 of the "Current Object")
:  E5 ;"Extra Variable" 5 of the "Current Object"

#1188 ;ShovePlayer Within TiledObject Diag ("Shove" the Player "Fetched" to "Reference 2" through freespace to the outside of the Object's Tile Solidity in the direction specified by "Extra Variable"s 4 and 5 of the "Current Object")
:  E4 ;(Obj0 X) "Extra Variable" 4 of the "Current Object"
:  E5 ;(Obj0 Y) "Extra Variable" 5 of the "Current Object"

#1189 ;ShovePlayer Riding TiledObject X ("Shove" the Player "Fetched" to "Reference 2" through freespace on the X axis along with the Object's Tile Solidity in the direction specified by "Extra Variable" 4 of the "Current Object")
:  E4 ;"Extra Variable" 4 of the "Current Object"

; ----------

#1190 ;ShovePlayer Riding TiledObject Y ("Shove" the Player "Fetched" to "Reference 2" through freespace on the Y axis along with the Object's Tile Solidity in the direction specified by "Extra Variable" 5 of the "Current Object")
:  E5 ;"Extra Variable" 5 of the "Current Object"

#1191 ;ShovePlayer Riding TiledObject Diag ("Shove" the Player "Fetched" to "Reference 2" through freespace along with the Object's Tile Solidity in the direction specified by "Extra Variable"s 4 and 5 of the "Current Object")
:  E4 ;(Obj0 X) "Extra Variable" 4 of the "Current Object"
:  E5 ;(Obj0 Y) "Extra Variable" 5 of the "Current Object"

#1192 ;ShovePlayer Within SolidObject X ("Shove" the Player "Fetched" to "Reference 2" through freespace on the X axis to the outside of the Object's "MainBounds" Box in the direction specified by "Extra Variable" 4 of the "Current Object")
:  E4 ;"Extra Variable" 4 of the "Current Object"

; ----------

#1193 ;ShovePlayer Within SolidObject Y ("Shove" the Player "Fetched" to "Reference 2" through freespace on the Y axis to the outside of the Object's "MainBounds" Box in the direction specified by "Extra Variable" 5 of the "Current Object")
:  E5 ;"Extra Variable" 5 of the "Current Object"

#1194 ;ShovePlayer Within SolidObject Diag ("Shove" the Player "Fetched" to "Reference 2" through freespace to the outside of the Object's "MainBounds" Box in the direction specified by "Extra Variable"s 4 and 5 of the "Current Object")
:  E4 ;(Obj0 X) "Extra Variable" 4 of the "Current Object"
:  E5 ;(Obj0 Y) "Extra Variable" 5 of the "Current Object"

#1407 ;Player Force VPUpdate (Update the viewport corresponding with the Player "Fetched" to "Reference 2" based on his automatic viewport settings)

#1428 ;Set CurrPlayer ByID (Set Player 1 as the "Current Player")
:   0 ;Player 1

; ----------

#1428 ;Set CurrPlayer ByID (Set the Player whose ID is stored in User Register 3 as the "Current Player")
:  R3 ;Value stored in User Register 3

#1429 ;Set CurrPlayer Reg (Set the Player whose pointer is stored in User Register 20 as the "Current Player")
: U20 ;User Register 20

; ----------

#1430 ;Set CurrPlayer Chr (Set the Player whose pointer is stored in User-created "Active Variable" 1 of the Player "Fetched" to "Reference 0" as the "Current Player")
:  a1 ;User-created "Active Variable" 1 of the Player "Fetched" to "Reference 0"

; ----------

#1431 ;Set CurrPlayer Obj (Set the Player whose pointer is stored in "Extra Variable" 8 of the Object "Fetched" to "Reference 0" as the "Current Player")
:  E8 ;"Extra Variable" 8 of the Object "Fetched" to "Reference 0"

#1431 ;Set Player Collision Area (Set Player 1 as the "Current Player", and to Collision Area 5, the incoming area beyond the horizontal end of the looping area)
:   0 ;Player 1
:   5 ;The incoming area to the right of the loop's horizontal end

; ----------

#1431 ;Set Player Collision Area (Set Player whose ID is stored in User Register 6 as the "Current Player", and to the Collision Area whose ID is stored in User Register 7)
:  R6 ;(Player)  Value stored in User Register 6
:  R7 ;(ColArea) Value stored in User Register 7

#1431 ;Set Player Collision Area (Set Player 1 as the "Current Player", and to the Collision Area that the "Current Object" is in)
:   0 ;Player 1

; ----------

#1431 ;Set Player Collision Area (Set Player whose ID is stored in User Register 9 as the "Current Player", and to the Collision Area that the "Current Object" is in)
:  R9 ;(Player)  Value stored in User Register 9